#AIRBAG RESET BMW CODE#

Make sure the light has turned off after the 6 seconds.ДЄttached is the SRS Light trouble code description.Д®DIT: If you have any problems, feel free to email me at vdang5(at)gmail. Remove the jumper wire and turn the ignition key back to ON (the light will stay lit for approximately 6 seconds then turn off). Perform steps 1-4 and then turn the ignition key to OFF. Light ON for 3 seconds (Break/start with more than 1 fault repeat Lamp on continuously = end of check control) Note number for example: xx4ДЇlashes quickly 1 to 2 times. Im told that it COULD be reset with a Peake tool (150), Stealer price (135), OR. Airbag light on Airbag deployed Car was in an accident Crash data stored Dealer or Shop told you. Note number for example: x2xДЇlashes quickly 1 to 4 times. Anyway, the airbag light came on after reassembling everything. Airbag module reset service for BMW or MINI cars.

Note number for example: 1xxДЇlashes quickly 1 to 4 times. Light ON for 3 seconds (Start of Fault Codes)ДЇlashes quickly 1 to 4 times. If everything is done correctly, it should display as follows:ДЇlashes quickly 1 to _ times depending on number of faults Make sure the jumper wire has a good connection with the pins.Д¤.) Go in your car and turn the ignition to ON in one quick movement.ДҐ.) Look at your SRS/Airbag Light and watch the flashes. Open your hood, and locate the diagnostic connector and unscrew the top.Дў.) Inside the diagnostic connector, locate pin #1 and pin #6.ДЈ.) Take your jumper wire and jump pin #1 and pin #6. They will either need to jump the pins, or will be able to read the flashing light (similar to reading check engine light codes).ДЎ.) Make sure your ignition is turned off. Something around 5inches long.Дў.) A Friend - Someone that you trust, and is competent.

This has worked on a 1990 and a 1991 3.25i.ДЎ.) Jumper wire - Nothing too long since you will be jumping pins at your Diagnostic Connector. This is the 1st write up for GETTING and RESETTING Airbag Codes/SRS Light. Don't rip this write up off from me, I worked hard doing this as a favor to the e30 community. I have done a search and read through a lot of posts on this forum about this issue (some are quite old) and it appears to me that it is a rather unknown entity and ultimately you need BMW to diagnose the fault. Some of the images were used from AllDataPro. The Airbag light stayed on a few days ago. If you want to do this correctly, go buy the proper tool or take your car to a professional. I went around some BMW shops to get quotes on getting the readout and the price ranges from 70 to 120. What happens or breaks on your car while you're doing this is your own fault. Disclaimer: This information is used from AllDataPro. http : //Troubleshooting Electrical Problems GAUGES AND ELECTRICAL.

Airbag reset bmw